Pues acabo de instalarle mi nuevo disco duro de 4Gb
Eso es usando la estupenda tarjeta que usa el XTIde y que compré en Ebay:
http://www.ebay.es/itm/Adaptateur-ISA-8 ... 2503454283?
El vendedor es extremadamente recomendable, sin él me hubiera costado mucho más instalarla. Encima resulta que él tiene un Amstrad PC3286
En mi caso me ha dado bastante lata ya que no me detectaba la compact flash sino cambiando el jumper a Slave en vez de Master. Luego leí esto, el punto primero:
"Common pitfalls
1) the default IO address for the card may conflict with any ethernet/networking cards your machine may have installed. Remove the ethernet card first, just to make sure the XTIDE is working. In fact, remove all cards that are not required for booting (sound, game, network) just to be safe and add them back in once the XTIDE is known to work.
2) on a 5150 machine, you *must* have a floppy controller installed. You can work around this with a configuration option in the BIOS, but your card's default settings will require a floppy to exist in the machine. Download the BIOS and idecfg.exe utility off the wiki page.
3) If using a CF/SD to IDE adapter, and it fails to boot, the Master Boot Record must be recreated for many CF cards before they can be booted. Most likely the same thing is true for SD cards. Boot to a floppy and type: "FDISK /MBR" and that will likely fix it."
Así que en cuanto le desenchufé mi tarjeta de ethernet me detectó la tarjeta CF como Master.
Luego es sólo pillarle el tranquillo. Cuando te arranque le das a la A para que te abra primero en mi caso la Gotek, y ahí le pones el primer disco de MSDos 6.22 y así primero usas el FDisk para preparar el disco duro y luego lo formateas con el Format. Luego instalas el MSDos. Así que así me creé una partición de arranque de dos gigas. Luego usando otra vez el Fdisk puedes crear una partición lógica para conseguir una partición D: con el resto de espacio de otros casi dos gigas.
Ya le puse el Windows 3.0 con los pasos que ya comenté.
Ahora a ver qué jueguillos le meto...
Por cierto que el disco duro con el XTIde tiene su propia Bios, así quue tengo que probar si me detecta las tres disqueteras, pero tengo que comprarme un alargador macho hembra de la faja del floppy para que llegue bien.
Edit: Pues vaya, no puedo conectar las dos disqueteras para 3.5", si las conecto no funciona ninguna. En cambio sí que funcionaba una de 3 1/2 y la de 5 1/4.