Chip Tester de 8bit-museum.de - Reloaded

Proyectos que no sean de hardware abierto o que no incluyan el código abierto

Moderador: Fundadores

Reglas del Foro
Aquí se puede hablar de proyectos de hardware que no tenga sus esquematicos, o si llevan software que este no disponga del código fuente.
Responder
Avatar de Usuario
slabbi
El infierno es su lugar
El infierno es su lugar
Mensajes: 176
Registrado: 23 Ago 2020, 22:14
Been thanked: 1 time
Contactar:

Re: Chip Tester de 8bit-museum.de - Reloaded

Mensaje por slabbi »

The BOM is correct.
You found the BOM in the Dropbox using the link you got from me or in the manual.
Also all values are printed on the PCB and the values are correct.
Don't worry. I use older photos on and in the manual that is all.


La lista de materiales es correcta.
Encontraste la lista de materiales en Dropbox usando el enlace que recibiste de mí o en el manual.
Además, todos los valores están impresos en la PCB y los valores son correctos.
No se preocupe. Utilizo fotos antiguas en y en el manual, eso es todo.
Avatar de Usuario
slabbi
El infierno es su lugar
El infierno es su lugar
Mensajes: 176
Registrado: 23 Ago 2020, 22:14
Been thanked: 1 time
Contactar:

Re: Chip Tester de 8bit-museum.de - Reloaded

Mensaje por slabbi »

In the next firmware:

Imagen
Avatar de Usuario
nandove
Aspirante a demonio
Aspirante a demonio
Mensajes: 347
Registrado: 20 Sep 2016, 17:13
Been thanked: 3 times

Re: Chip Tester de 8bit-museum.de - Reloaded

Mensaje por nandove »

Ya he terminado de soldarlo a falta del dip 32p pero si he podido ncenderlo, de momento me fuciona alimentandolo por USB, con barrel jack no lo he conseguido, algo se me escapa, ya daré con el problema.

Por el momento enciende pero esta vacio logicamente, ahora tengo que pedir un programador "Diamex USB ISP programmer for Atmel AVR" para programar mediante el ISP conector.

Voy a ver si localizo un video que de mas detalles :)
Avatar de Usuario
slabbi
El infierno es su lugar
El infierno es su lugar
Mensajes: 176
Registrado: 23 Ago 2020, 22:14
Been thanked: 1 time
Contactar:

Re: Chip Tester de 8bit-museum.de - Reloaded

Mensaje por slabbi »

In the German forum one user has posted his tester with all features added (SD Card and SIMM/SIPP adapter):
DRAM/SRAM Tester vom 8Bit-Museum.de
Avatar de Usuario
slabbi
El infierno es su lugar
El infierno es su lugar
Mensajes: 176
Registrado: 23 Ago 2020, 22:14
Been thanked: 1 time
Contactar:

Re: Chip Tester de 8bit-museum.de - Reloaded

Mensaje por slabbi »

nandove escribió: 20 Sep 2020, 13:08 Ya he terminado de soldarlo a falta del dip 32p pero si he podido ncenderlo, de momento me fuciona alimentandolo por USB, con barrel jack no lo he conseguido, algo se me escapa, ya daré con el problema.

Por el momento enciende pero esta vacio logicamente, ahora tengo que pedir un programador "Diamex USB ISP programmer for Atmel AVR" para programar mediante el ISP conector.

Voy a ver si localizo un video que de mas detalles :)
If you operate the tester without a DC/DC module: The jumpers must be set. Both USB and barrel work.

If you operate the tester with DC/DC module: No jumpers may be set. Both USB and barrel jack work.

Polarity of the barrel jack (middle = plus, outside = minus), 7-9V are ok.

When you want to use the barrel jack without DC/DC module the components in the "optional" area must be soldered.


Si utiliza el comprobador sin un módulo DC/DC: Los puentes deben estar configurados. Tanto el USB como el barril funcionan.

Si utiliza el comprobador con un módulo DC/DC: No se pueden configurar puentes. Funcionan tanto el USB como el conector de barril.

La polaridad del conector de barril (medio = más, exterior = menos), 7-9V está bien.

Cuando desee utilizar el conector de barril sin módulo DC/DC, los componentes en el área "opcional" deben estar soldados.
Avatar de Usuario
nandove
Aspirante a demonio
Aspirante a demonio
Mensajes: 347
Registrado: 20 Sep 2016, 17:13
Been thanked: 3 times

Re: Chip Tester de 8bit-museum.de - Reloaded

Mensaje por nandove »

slabbi escribió: 20 Sep 2020, 13:23

If you operate the tester without a DC/DC module: The jumpers must be set. Both USB and barrel work.

If you operate the tester with DC/DC module: No jumpers may be set. Both USB and barrel jack work.

Polarity of the barrel jack (middle = plus, outside = minus), 7-9V are ok.

When you want to use the barrel jack without DC/DC module the components in the "optional" area must be soldered.

Yes you're right! via Barrel Jack works ;)

I'm waiting for the 6-pin ISP programmer and the dip 32p.

Thanks you.
Avatar de Usuario
geloalex !Msx 3
Demonio segundo orden
Demonio segundo orden
Mensajes: 1397
Registrado: 19 Abr 2018, 19:21
Ubicación: Instagram: geloalex
Has thanked: 936 times
Been thanked: 487 times

Re: Chip Tester de 8bit-museum.de - Reloaded

Mensaje por geloalex »

Hi Slabbi what is the better option for programing the Atmel via ISP??

Can I use an arduino Uno or Leonardo??
nandove escribió: 20 Sep 2020, 13:08 Diamex USB ISP programmer for Atmel AVR
Or this option that comments nandove?

Another question about jumpers:
JP2 an JP3 must be selected when no barrel power (JP1 and JP4 opened)
If barrel selected we have JP2 and JP3 open ....right?

Thanks Slabbi
SpectrumZX81,ZX48,ZX48+,ZX128+2+3CommodoreA1200,A500,C64,C64C,C16AmstradCPC464,CPC6128MSXHB20P,HB75P,HBF1,HBF1XD,SVI728,8020Atari2600Sixer,2600Jr,7800PhillipsVideopacG7000NintendoGB,GBC,GBA,NES,FAMICOM,SNES,N64PCEnginePCEngine,PCEngineDUOSegaGG,SMS,SMS2,MD1,MD2,MEGACD2,SATURN,DC,NAOMIMicrosoftXBOX360Sony PS1,PS2,PS3,PS4,PSP,PSVitaMINISNES,SNES,MD,PSX INSTAGRAM: geloalex
Avatar de Usuario
slabbi
El infierno es su lugar
El infierno es su lugar
Mensajes: 176
Registrado: 23 Ago 2020, 22:14
Been thanked: 1 time
Contactar:

Re: Chip Tester de 8bit-museum.de - Reloaded

Mensaje por slabbi »

geloalex escribió: 20 Sep 2020, 19:55 Can I use an arduino Uno or Leonardo??
nandove escribió: 20 Sep 2020, 13:08 Diamex USB ISP programmer for Atmel AVR
Or this option that comments nandove?

Another question about jumpers:
JP2 an JP3 must be selected when no barrel power (JP1 and JP4 opened)
If barrel selected we have JP2 and JP3 open ....right?
I am currently collecting feedback regarding programmers that are working with an ATmega2560:

Well-established programmers are:
• Diamex USB ISP-Programmer for AVR, STM32, LPC-Cortex (Prog-S2), approx. 20 Euro
• Diamex USB ISP-Programmer for Atmel AVR, approx. 18 Euro
• Tremex USB ISP-Programmer, approx. 20 Euro
• Pololu USB AVR Programmer, approx. 20 Euro
• Pololu USB AVR Programmer v2.1, approx. 12 Euro
• mySmartUSB MK2, approx. 30 Euro
• mySmartUSB MK3, approx. 40 Euro
• Atmel ICE, approx. 120 Euro
Feedback that there were problems or the programming did not work:
• USBASP (different Models), approx. 10 Euro
• Bus Pirate. approx. 25 Euro

It is not long, but I will add feedback.

Yes, you can use an Arduino for ISP programming. But it is slow, very slow. I have an tutorial in the manual (see appendix).

The jumpers are used when no DC/DC module is used. Then you set all jumpers. When you use the DC/DC module you remove all jumpers.

Or in other words (the jumpers are relevant when no module is used):
JP3 is GND and must be set when USB _and/or_ BJ are used without the module.
JP2 is USB and must be set when USB is used without the module.
JP1/JP4 is BJ and must be set when BJ is used without the module.
Avatar de Usuario
nandove
Aspirante a demonio
Aspirante a demonio
Mensajes: 347
Registrado: 20 Sep 2016, 17:13
Been thanked: 3 times

Re: Chip Tester de 8bit-museum.de - Reloaded

Mensaje por nandove »

geloalex escribió: 20 Sep 2020, 19:55 Hi Slabbi what is the better option for programing the Atmel via ISP??

Can I use an arduino Uno or Leonardo??
nandove escribió: 20 Sep 2020, 13:08 Diamex USB ISP programmer for Atmel AVR
Or this option that comments nandove?

Another question about jumpers:
JP2 an JP3 must be selected when no barrel power (JP1 and JP4 opened)
If barrel selected we have JP2 and JP3 open ....right?

Thanks Slabbi

Un amigo que sabe un huevo, me ha indicado que si tienes un arduino, hay un sketch que transforma un arduino normal en un programador AVR:

https://www.arduino.cc/es/Tutorial/ArduinoISP

En mi caso, no tengo un arduino :/
Avatar de Usuario
slabbi
El infierno es su lugar
El infierno es su lugar
Mensajes: 176
Registrado: 23 Ago 2020, 22:14
Been thanked: 1 time
Contactar:

Re: Chip Tester de 8bit-museum.de - Reloaded

Mensaje por slabbi »

nandove escribió: 20 Sep 2020, 20:18 Un amigo que sabe un huevo, me ha indicado que si tienes un arduino, hay un sketch que transforma un arduino normal en un programador AVR:
https://www.arduino.cc/es/Tutorial/ArduinoISP
En mi caso, no tengo un arduino :/
Only to add:
When you have connected the Arduino: Do _not_ burn a bootloader, you do not need it.

Instead: programming is done with AVRDUDE. The avrisp is specified as the programmer:
avrdude.exe -C"avrdude.conf" -v -patmega2560 -cavrisp ...
and the ATmega2560 is programmed as described in section 4 of the manual.
Responder

Volver a “Proyectos de hardware generales”