AVRfuses is available here: https://vonnieda.org/software/avrfuses
There are some other GUIs available. I provide some scripts for Windows, so there is no GUI necessary.
Moderador: Fundadores
AVRfuses is available here: https://vonnieda.org/software/avrfuses
Have you set the fuses and then the programmer was not able to program the ATmega? Or have you tried to set the fuses and the programmer was not able to do this?retrolab escribió: ↑21 Mar 2021, 20:59 Hello.
I'm running flash process like manual says but the process fails. I've an Pololu USB AVR Programmer v2.1 and the drivers are installed correctly. The system detects the Programmer but when I run avrdude shows the "avrdude.exe: stk500v2_ReceiveMessage(): timeout" error and fails.
Any idea?
Has it worked? If not we can do a video meeting. Please contact me via PM.retrolab escribió: ↑21 Mar 2021, 20:59 Hello.
I'm running flash process like manual says but the process fails. I've an Pololu USB AVR Programmer v2.1 and the drivers are installed correctly. The system detects the Programmer but when I run avrdude shows the "avrdude.exe: stk500v2_ReceiveMessage(): timeout" error and fails.
Any idea?
You might like the chip insertion detection.