Va de Retro (Satanás) -- Versión 3.3 SSL

A mi los chips que me dijiste me daban bien y cuando los colocaba mal me daba fail.
Yo alimento con dos baterias lipo de 3,7v y luego con un dc-dc reduzco a 5v que injecto en la entrada USB , ademas no uso el RECON si no un modulo chino ,el resto esta todo igual.

The chips you told me when i inserted ok i read good and when I put them wrong I read fail.
My power supply for the tester are two 3.7v lipo batteries and then with a dc-dc I reduce to 5v that I inject into the USB input, also I do not use the RECON i use a chinese module ,the rest is all the same.

Muchas gracias. Así es como me funciona ahora, antes con el problema que tuve daba unos resultados consistentes en apariencia pero en realidad era según le pillaba.

I have now ordered an OLED:

https://www.aliexpress.com/item/4000249830989.html

Not as cheap as a simple LCD2004, but the display is just awesome:

Parece mucho más legible así. Enhorabuena.

PD: Ahora solo necesita la caja a medida.

slabbi escribió: ↑17 Nov 2020, 17:36 I have now ordered an OLED:

https://www.aliexpress.com/item/4000249830989.html

Not as cheap as a simple LCD2004, but the display is just awesome:

Pues si, mucho mejor aspecto así.

slabbi escribió: ↑17 Nov 2020, 17:36 I have now ordered an OLED:

https://www.aliexpress.com/item/4000249830989.html

Not as cheap as a simple LCD2004, but the display is just awesome:

Youre faster than me jajajajaj i ordered the same but i dont know if will working fine.
I changed the blue display by a classic green .... this have much better contrast and retro style.
When oled arrive i change it again



I tested smd logic chips with adapters SOP16 SOP20 and SOP28 and runs ok this adapters are common and good addon to the chip tester.
I have a PLCC adaptors too but i just not tested.
You can talk about them on the next manual version.
Test it!!!

Una versión con LEDs SMD 0805.

Oled is ....love!









Enviado desde mi iPhone utilizando Tapatalk

It's amazing, I'll have one of them!

Thanks for the info @geloalex

Changelog for the upcoming v.15:

- SRAM x150 fixed,
- Selftest improved,
- March-U error handling fixed
- Pull-up settings added for (P)ROMs/EPROMs,
- Added: ZIP20 64k x 4, MK4332, 7470, 7483, 74159, 74184, 74185, 74196, 74518, 74519, 74620, 74621, 74623, 4929, 49700, 49701, 49702, 49703, 49704, 49705, 49713, 49714, Added: 4930, 4931, 49700, 49701, 49702, 49703, 49704, 49705, 49713, 49714, 75494, 74LS54, 74111, 74115, 74388, 74563, 74564, 74580, 74638, 74639, 74689, 74740, 74741, 74744, 74804, 74805, 74821, 74823, 74824, 74825, MOS7707, 7708, 7709, 7711, 7712, 7713, 7714, 7715, 8708, 8713
- Fixed: 74165, 74193, 74273, 74283, 7488/188/288
- number of custom SRAM and DRAM chips increase to three each and size definition >64k fixed
- several chips added as "example" for custom chips

Work is still in progress...