Va de Retro (Satanás) -- Versión 3.3 SSL

Hello Slabbi,

A member from another forum I use to read found relabelled 74-series ICs... an entire batch of 74HC08 marked as LS.
Is there a way a 74 ic could be tested to check what input voltage ranges react to?

Thank you in advance,
Jaume

No, there is no way to do this. The I/O is digital only. There are other testers that are specialized on this.

slabbi escribió: ↑19 Dic 2021, 20:46 No, there is no way to do this. The I/O is digital only. There are other testers that are specialized on this.

Hi Stephan, can the tester check the CPUs? (as per manual i see that the short answer is no) Is it in your plans to test the CPUs? ... i.e. 8501 (used in C16/C4Plus) usually have running problems partly because the I/O ports ... Z80 on spectrums can usually become break... even ULA can have fails.... These are just ideas...

I got the prototypes today:



Also 2564 EPROMs are programable (from firmware v.22) now.

Following EPROMs are supported now:
- 2708
- 2716
- 2732
- TMS2716
- 2532
- 2564

I have now created a Reddit community for the RCT.
So I don't have to be registered in countless forums and watch them.

https://www.reddit.com/r/RetroChipTester/

Thanks Slabbi

slabbi escribió: ↑10 Oct 2022, 08:46 I have now created a Reddit community for the RCT.
So I don't have to be registered in countless forums and watch them.

https://www.reddit.com/r/RetroChipTester/

Is there still no possibility of getting it in Spain? Or to get the information to do it yourself?

wilco2009 escribió: ↑11 Oct 2022, 17:21

slabbi escribió: ↑10 Oct 2022, 08:46 I have now created a Reddit community for the RCT.
So I don't have to be registered in countless forums and watch them.

https://www.reddit.com/r/RetroChipTester/

Is there still no possibility of getting it in Spain? Or to get the information to do it yourself?

El manda la placa con el ATmega2560 ya soldado y la placa de alimentación , el resto hay que montarlo.....creo que sigue siendo asi , lo que no se si hay posibilidad de comprarlo montado y funcional.

geloalex escribió: ↑11 Oct 2022, 18:52

wilco2009 escribió: ↑11 Oct 2022, 17:21

slabbi escribió: ↑10 Oct 2022, 08:46 I have now created a Reddit community for the RCT.
So I don't have to be registered in countless forums and watch them.

https://www.reddit.com/r/RetroChipTester/

Is there still no possibility of getting it in Spain? Or to get the information to do it yourself?

El manda la placa con el ATmega2560 ya soldado y la placa de alimentación , el resto hay que montarlo.....creo que sigue siendo asi , lo que no se si hay posibilidad de comprarlo montado y funcional.

No, eso era antes, parece que ahora hay una tasa fija para las ventas internacionales sobre el reciclaje del plástico, y ha dejado de vender a los paises que la cobran.
Al ver que el hilo se movía he pensado que quizás habia encontrado la manera de enviar a España sin arruinarse.

Del tema de las tasas de reciclaje lo hablábamos en el subforo "Visto en la red".