Va de Retro (Satanás) -- Versión 3.3 SSL

vic20_211127.rbf
- VIC-I color-pixel data alignment fix (thanks, AMR!)
- Audio filter simplifications / improvements by AMR
- 1541 update from C64/C16, add disk unmounting to OSD

https://github.com/mist-devel/mist-bina ... ores/vic20


colecovision_211126.rbf
- Increase keyboard FIFO size to avoid overflow
- Change SDRAM drive strength to 8mA
- Update the CPU and other components

https://github.com/mist-devel/mist-bina ... lecovision


Ti994a_211126.rbf
- Use higher SDRAM clock
- Change SDRAM drive strength to 8mA

https://github.com/mist-devel/mist-bina ... res/ti994a

firmware_120721
- Add support for the second stick on gamepads (4 axes/gamepad). Tested only on one model yet.
- Add analogue joystick scaling (joystick_analog_multiplier, joystick_analog_offset options)
- Restructured menu engine. Easier maintenability, less flash space. As this is a
rather large change, report any issues or menu navigation anomalies.

https://github.com/mist-devel/mist-bina ... r/firmware


minimig_mist_rtg_211207.rbf
- Add analogue joystick support (turn on in Chipset menu)
- Digital joystick also affects POT registers (fix Jimmy White's whirlwind snooker)
- Update RTG, support screen dragging, update the utility disk (by AMR)

https://github.com/mist-devel/mist-bina ... inimig-aga

Amstrad_211211.rbf
- Some FDC updates
- Fix some CRTC behavior (especially CRTC0 ones)
- Allow umounting disk images from the OSD

https://github.com/mist-devel/mist-bina ... mstrad_alt

Commodore 64
C64_211220.rbf
- CIA Timer fixes
- VIC-II: latch xscroll one pixel later (Happy 2021 demo)
- Keyboard numpad symbol support
- REU up to 16 MB with original timings and bus arbitration

https://github.com/mist-devel/mist-bina ... res/fpga64

Commodore 64
C64_211224.rbf
- Merry "Treu Love" Christmas!

https://github.com/mist-devel/mist-bina ... res/fpga64

firmware_220112
- Fix some issues regarding to the new menu engine (thanks retrofun to fix Minimig profile loading).
- Query the device descriptor only once for USB devices. This might prevent (un)expected mode switch.
- Convert [corename].CFG files to INI format. The old file will still load, but Save settings will write in INI.
- Add a MISTCFG.INI file for global settings, writeable for the firmware itself.
- Add an interactive joystick map configuration to the Input Test OSD page. Read the scrolling helptext for usage.
- Send a default date to the cores if no USB-RTC found.

https://github.com/mist-devel/mist-bina ... r/firmware

¿Puedes recomendarme algún sitio interesante para cacharrear con el hardware y la programación para este dispositivo?

cacharreo escribió: ↑12 Ene 2022, 22:38 ¿Puedes recomendarme algún sitio interesante para cacharrear con el hardware y la programación para este dispositivo?

En el github del proyecto se supone que esta todo lo necesario.
https://github.com/mist-devel

O si te pones en contacto con ManuFerHi, el desarrollador de la Mistica, el te puede guiar mejor.
https://github.com/ManuFerHi/SiDi-FPGA

firmware_220113
- Fixes regarding to joystick_remap parsing

https://github.com/mist-devel/mist-bina ... r/firmware

vic20_220114.rbf
- Mega-Cart support (Mega-Thanks to AMR!)

https://github.com/mist-devel/mist-bina ... ores/vic20