Hola a todos,
Hace unos días me llegaron 15 placas para sacar video compuesto según opciones. Van perfectas para sustituir las que están en el interior del modulador RF de varios equipos Spectrums (A los que se puede hacer el MOD).
Bueno, el caso es que no necesito todas. Con 5 ya me valen,
por lo que me sobran 10.
TODAS REPARTIDAS. NO QUEDAN MÁS PLACAS!!!
Información importante y fuente del desarrollo:
► Mostrar Spoiler
Atento a las opciones:
Sinclair Spectrum Composite Mod PCB
I designed a PCB to house several versions of the Spectrum Composite Mod. Details of how to implement the PCB can be found in my series on Refurbishing a 48K Rubber Keyed Spectrum on my companion site, Projectavr.com. The PCB simply replaces the existing Modulator PCB. I would recommend that you remove the original carefully and put it in storage, in case you ever wish to re-install it for authenticity.
The PCB itself is very simple, requiring just a few components to operate. Choose which of the three options you would like to use.
Option 1 is an Inverted Emitter Follower recommended to me by Andrew Gostling in an attempt to get a Dell UltraSharp 2007FP Monitor to work with a 48K Spectrum. Sadly, the monitor is extremely picky about it’s composite input and is well documented for it. In this instance it didn’t work. However, the composite mod works with all the other monitors I have tried it with.
Option 2 is a simple NPN transistor and resistor mod. the NPN Transistor can be any general purpose device. I have used a BC547 in the past.
Option 3 is a single 100uF capacitor which is seen to be the minimum required.
I have had several conversations around the need for other components with regard to the composite mod. Some say that it is not necessary at all and others say that, in case the monitor goes faulty or is very badly designed, it can feed voltage back to the Spectrum. I recommend you do your own research and choose the option that best suits you (including a direct connection and/or suspending the components outside of the modulator box retaining the original PCB inside the modulator).
Enlace donde encontrar más información y Gerbers a quien interese:
http://projectspeccy.com/projects/ además de otros proyectos muy interesantes.
Los Gerbers están en la web de PCBWay disponibles para quien quiera o necesite más de estas placas.
He encargado transistores para poder montarlas, los componentes son realmente baratos, a mi parecer esta placa solo tiene sentido para personas que tenga curiosidad, pero sobretodo a los que quieren hacer el MOD con transistores, que es más complejo que meter un simple condensador dentro de la caja del modulador de señal.
Interesados:
Nombre | Cantidad | Componentes | Soldado | Pagado | Tipo Envío | Estado |
iturbez: | 2 | No | No | Si | Ordinario | Recibido |
Mikes | 1 | Si | Si | Si | Ordinario | Recibido |
Shikitin: | 1 | No | No | Si | Ordinario | Recibido |
zx4ever | 4 | Si | Si | Si | Certificado | Recibido |
kik3 | 2 | Si | No | Si | Ordinario | Recibido |
oldcomput | 2 | No | No | Si | Ordinario | Recibido |
Las placas son LeadFree.
Adjudicadas: 12
Restantes: 0.
El precio al que la dejo es a 1.5€ la placa.
Placa + componentes: 2.5€,
sino lo que me cobren en la tienda local nada de tienda local, mu caro.
Placa + componentes + soldado: 3.5€.
Envío ordinario: 1€
Envío certificado: 4.5€ <-- Correos se ha columpiado con las últimas tarifas 2021.