Chip Tester de 8bit-museum.de - Reloaded
Moderador: Fundadores
Reglas del Foro
Aquí se puede hablar de proyectos de hardware que no tenga sus esquematicos, o si llevan software que este no disponga del código fuente.
Aquí se puede hablar de proyectos de hardware que no tenga sus esquematicos, o si llevan software que este no disponga del código fuente.
- slabbi
- El infierno es su lugar
- Mensajes: 177
- Registrado: 23 Ago 2020, 22:14
- Been thanked: 2 times
- Contactar:
Re: Chip Tester de 8bit-museum.de - Reloaded
Please report your experience with that programmer.
I usually recommend this one
https://www.diamex.de/dxshop/USB-ISP-Pr ... ex-Prog-S2
because it also flashes STM32 and LPC-Cortex (Prog-S2)
or this
https://www.diamex.de/dxshop/USB-ISP-Pr ... -Atmel-AVR
I usually recommend this one
https://www.diamex.de/dxshop/USB-ISP-Pr ... ex-Prog-S2
because it also flashes STM32 and LPC-Cortex (Prog-S2)
or this
https://www.diamex.de/dxshop/USB-ISP-Pr ... -Atmel-AVR
- rgrocha
- Le gustan las llamas
- Mensajes: 59
- Registrado: 09 Abr 2014, 10:23
- Ubicación: Tenerife
Re: Chip Tester de 8bit-museum.de - Reloaded
Esto está puesto en las instrucciones en inglés de Slabbi te dice cómo configurar el Arduino y hacer el cable y todo.nandove escribió:geloalex escribió: ↑20 Sep 2020, 19:55 Hi Slabbi what is the better option for programing the Atmel via ISP??
Can I use an arduino Uno or Leonardo??
Or this option that comments nandove?
Another question about jumpers:
JP2 an JP3 must be selected when no barrel power (JP1 and JP4 opened)
If barrel selected we have JP2 and JP3 open ....right?
Thanks Slabbi
Un amigo que sabe un huevo, me ha indicado que si tienes un arduino, hay un sketch que transforma un arduino normal en un programador AVR:
https://www.arduino.cc/es/Tutorial/ArduinoISP
En mi caso, no tengo un arduino :/
Sent from my Pixel 3a using Tapatalk
- cacharreo
- Moderador
- Mensajes: 6119
- Registrado: 09 Ago 2019, 10:17
- Ubicación: /home/cacharreo/
- Has thanked: 1249 times
- Been thanked: 3004 times
- Contactar:
Re: Chip Tester de 8bit-museum.de - Reloaded
Gracias pero preferí verificarlo porque hay discrepancias, por ejemplo y si no recuerdo mal, en el manual para la resistencia R1 de la Opción # 2 del módulo de alimentación aparece el valor 1K y en la placa 2k2.slabbi escribió: ↑19 Sep 2020, 17:47La lista de materiales es correcta.
Encontraste la lista de materiales en Dropbox usando el enlace que recibiste de mí o en el manual.
Además, todos los valores están impresos en la PCB y los valores son correctos.
No se preocupe. Utilizo fotos antiguas en y en el manual, eso es todo.
© cacharreo
- slabbi
- El infierno es su lugar
- Mensajes: 177
- Registrado: 23 Ago 2020, 22:14
- Been thanked: 2 times
- Contactar:
Re: Chip Tester de 8bit-museum.de - Reloaded
Yes. You can use 2.2k or 1k. I use usually low power LED, so 2.2k is fine. Most people use "normal" LEDs, so the LED is a little bit dark and 1k is more suitable.
I changed this in the manual and BOM but on the boards it will be seen in the next batch I order.
Sorry, for the inconvenience. I will mention this in the manual.
Edit:
In the next version of the manual you will find:
On the circuit board, R1 can still be labeled “2.2k”. 2.2k is sufficient for low-power LEDs, but the value for normal LEDs should be 1k so that the LED is sufficiently bright.
- cacharreo
- Moderador
- Mensajes: 6119
- Registrado: 09 Ago 2019, 10:17
- Ubicación: /home/cacharreo/
- Has thanked: 1249 times
- Been thanked: 3004 times
- Contactar:
Re: Chip Tester de 8bit-museum.de - Reloaded
No tiene importancia, verifico todo dos o más veces para no tener que desoldar. Gracias.
© cacharreo
- slabbi
- El infierno es su lugar
- Mensajes: 177
- Registrado: 23 Ago 2020, 22:14
- Been thanked: 2 times
- Contactar:
Re: Chip Tester de 8bit-museum.de - Reloaded
It's good! If you order from "Mouser" you should definitely check all components before welding. I looked for an error together with a user and it turned out that one of the supplied PNP transistors were of a completely wrong type. Difficult to find later. The best thing to do is to briefly review all the values so there are no wrong ones.
¡Es bueno! Si realiza un pedido a "Mouser", definitivamente debe verificar todos los componentes antes de soldar. Busqué un error junto con un usuario y resultó que uno de los transistores PNP suministrados era de un tipo completamente incorrecto. Difícil de encontrar más tarde. Lo mejor que puede hacer es revisar brevemente todos los valores para que no haya errores.
- geloalex
- Demonio segundo orden
- Mensajes: 1419
- Registrado: 19 Abr 2018, 19:21
- Ubicación: Instagram: geloalex
- Has thanked: 955 times
- Been thanked: 498 times
Re: Chip Tester de 8bit-museum.de - Reloaded
Tienes razón.... las imprimí en el chollo y las deje allí cuando marche de vacaciones , contaba con empezar a montar cuando volviera.rgrocha escribió: ↑20 Sep 2020, 22:16Esto está puesto en las instrucciones en inglés de Slabbi te dice cómo configurar el Arduino y hacer el cable y todo.nandove escribió:geloalex escribió: ↑20 Sep 2020, 19:55 Hi Slabbi what is the better option for programing the Atmel via ISP??
Can I use an arduino Uno or Leonardo??
Or this option that comments nandove?
Another question about jumpers:
JP2 an JP3 must be selected when no barrel power (JP1 and JP4 opened)
If barrel selected we have JP2 and JP3 open ....right?
Thanks Slabbi
Un amigo que sabe un huevo, me ha indicado que si tienes un arduino, hay un sketch que transforma un arduino normal en un programador AVR:
https://www.arduino.cc/es/Tutorial/ArduinoISP
En mi caso, no tengo un arduino :/
Sent from my Pixel 3a using Tapatalk
SpectrumZX81,ZX48,ZX48+,ZX128+2+3CommodoreA1200,A500,C64,C64C,C16AmstradCPC464,CPC6128MSXHB20P,HB75P,HBF1,HBF1XD,SVI728,8020Atari2600Sixer,2600Jr,7800PhillipsVideopacG7000NintendoGB,GBC,GBA,NES,FAMICOM,SNES,N64PCEnginePCEngine,PCEngineDUOSegaGG,SMS,SMS2,MD1,MD2,MEGACD2,SATURN,DC,NAOMIMicrosoftXBOX360Sony PS1,PS2,PS3,PS4,PSP,PSVitaMINISNES,SNES,MD,PSX INSTAGRAM: geloalex
- papanillu
- Aspirante a demonio
- Mensajes: 382
- Registrado: 02 Jul 2017, 21:46
- Ubicación: Baix Llobregat
- Been thanked: 2 times
Re: Chip Tester de 8bit-museum.de - Reloaded
Hi Stephan,slabbi escribió: ↑20 Sep 2020, 21:36 Please report your experience with that programmer.
I usually recommend this one
https://www.diamex.de/dxshop/USB-ISP-Pr ... ex-Prog-S2
because it also flashes STM32 and LPC-Cortex (Prog-S2)
or this
https://www.diamex.de/dxshop/USB-ISP-Pr ... -Atmel-AVR
Finally I bought this https://www.diamex.de/dxshop/USB-ISP-Pr ... ex-Prog-S2. From amazon,
It comes with a note saying that for manual and software, you have to go to the download area at diamex.de , but I cannot find any download in that site.
Do you have the instructions of this programmer?
Can you share it?
Thanks
EDIT:
I had to cennect using a computer, not a tablet.
- slabbi
- El infierno es su lugar
- Mensajes: 177
- Registrado: 23 Ago 2020, 22:14
- Been thanked: 2 times
- Contactar:
Re: Chip Tester de 8bit-museum.de - Reloaded
The guys have an German manual only:
https://www.diamex.de/dxshop/mediafiles ... rog-s2.pdf
You need not much:
DIP-Switches
Use the 6 pin cable to connect the programmer. Vcc is "upper right" pin on the board (usually the red marked cable is up, aligned to the display).
For Windows 10 you do not need any driver. The programmer is recognized as virtual COM port. Check the device manager which port is used. You need this information for AVRDUDE to flash the firmware.
https://www.diamex.de/dxshop/mediafiles ... rog-s2.pdf
You need not much:
DIP-Switches
1 2 3 4 - off - - programmer provides no voltage off on - - programmer provides 3.3V on on - - programmer provides 5V 1 2 3 4 - - off off Atmel AVR using ISP - - off on STM32 Cortex-M using UART - - on off NXP/LPC Cortex-M using UART - - on on USB/Serial converter without controlling the handshakeSo on/on/off/off (^/^/v/v) is for 5V Atmel.
Use the 6 pin cable to connect the programmer. Vcc is "upper right" pin on the board (usually the red marked cable is up, aligned to the display).
For Windows 10 you do not need any driver. The programmer is recognized as virtual COM port. Check the device manager which port is used. You need this information for AVRDUDE to flash the firmware.