That's a great idea, could be nice to record it on Youtube like a Live interview, where people could ask questions and you explain everything about the board and how it works ... so on.
Would be fantastic
Moderador: Fundadores
That's a great idea, could be nice to record it on Youtube like a Live interview, where people could ask questions and you explain everything about the board and how it works ... so on.
Reichelt used DHL for a very long time but some months ago they switched to DPD. Since this change, parcels are often delayed.
The inconvenient was 2 weeks ago, when DPD (Seur here) decided to return the parcel.
With simple PALs, you can quite easily determine logic equations that reflect the behavior of the chip in this way.This approach does not work for the following devices:
All registered PAL devices. (PAL16R4, PAL16R6, PAL16R8, etc.)
All GAL devices configured to be registered. (GAL16V8, etc.)
PEEL devices (18CV8, etc.) which have a different architecture than PALs / GALs.
Non-PAL or GAL devices (82S153, PLS153, etc.) which have a different architecture and pinout than PALs / GALs.
In general all registered devices cannot be dumped, which includes purely combinatorial devices that implement latches through combinational logic
Specific limitations for GAL16V8
A GAL16V8 can be configured as combinatorial, registered, or mixed. Only purely combinatorial configurations can be dumped. To aid in identifying a registered configuration you may note that pin 11 (OE #) is tied to ground and pin 1 (CLK) is tied to a clock source or write strobe. However these types of connections are not reliable indicators of a registered configuration.
Strange. I could see all pictures. I moved these to a picture host. Better?